Enhancement, wet film with water purification for 1 to 2 minutes, and then use water spray gun constantly scour, erosion method: reverse nozzle on the screen, interval, until all motifs like clear 

Exposure, according to the use of light source and the sensitive glue, thickness of coating method, film font size, set the time 

Dry, good network version of photosensitive glue dry, temperature should be kept below 45 degrees 

On the sensitive glue, on photosensitive glue must be on the average, on both the front and back of the card will be 

Dry, clean screen directly use hair dryer, or oven drying at low temperature 

Old screen washing method, with a powder to take off the membrane water transfer in silk screen net pages placed 2-3 minutes, hae-chan of cloth on the two sides brush brush, silk screen version of the surface until the photosensitive glue film so far 

Washing the nets, the new version wash method, first of all use water clean screen cloth, that day with detergent to wipe clean on both sides, after washing with water, and then with a ground net paste on screen surface, two sides brush with the brush again washed with water, finally using the degreasing degreasing agent water, degreasing agent to play two sides brush with the brush on the net, after washing with water, 

Net has two forms, right Angle 90 degrees, 22.5 degrees suspension, 45 degrees, dragnet will make frame on both sides at the same time stress, catenary yarn net box seal surface coating a layer of glue, accurately adjusted net clamp, make nets not only both sides in two parallel straight line position, such as accurate and net cloth mesh required and net line parallel, selects the compressive bar and clip-on net 

Accurate models of recipients, according to the requirements of material and specifications of the production network version of the material, (silk screen net yarn, net frame, photosensitive glue, network version of the film, such as specific customer production requirements and delivery date. 

Enhancement, wet film with water purification for 1 to 2 minutes, and then use water spray gun constantly scour, erosion method: reverse nozzle on the screen, interval, until all motifs like clear 

Exposure, according to the use of light source and the sensitive glue, thickness of coating method, film font size, set the time 

Dry, good network version of photosensitive glue dry, temperature should be kept below 45 degrees 

On the sensitive glue, on photosensitive glue must be on the average, on both the front and back of the card will be 

Dry, clean screen directly use hair dryer, or oven drying at low temperature 

Old screen washing method, with a powder to take off the membrane water transfer in silk screen net pages placed 2-3 minutes, hae-chan of cloth on the two sides brush brush, silk screen version of the surface until the photosensitive glue film so far 

Washing the nets, the new version wash method, first of all use water clean screen cloth, that day with detergent to wipe clean on both sides, after washing with water, and then with a ground net paste on screen surface, two sides brush with the brush again washed with water, finally using the degreasing degreasing agent water, degreasing agent to play two sides brush with the brush on the net, after washing with water, 

Net has two forms, right Angle 90 degrees, 22.5 degrees suspension, 45 degrees, dragnet will make frame on both sides at the same time stress, catenary yarn net box seal surface coating a layer of glue, accurately adjusted net clamp, make nets not only both sides in two parallel straight line position, such as accurate and net cloth mesh required and net line parallel, selects the compressive bar and clip-on net 

Accurate models of recipients, according to the requirements of material and specifications of the production network version of the material, (silk screen net yarn, net frame, photosensitive glue, network version of the film, such as specific customer production requirements and delivery date.